BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Weston Art & Innovation Center - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://westonaic.org
X-WR-CALDESC:Events for Weston Art & Innovation Center
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260429T160000
DTEND;TZID=America/New_York:20260429T200000
DTSTAMP:20260505T092608
CREATED:20250517T175320Z
LAST-MODIFIED:20250517T175320Z
UID:40463-1777478400-1777492800@westonaic.org
SUMMARY:Tech Certifications: 3D Printer\, Laser Cutter\, Cricut Maker
DESCRIPTION:Tech certifications are available by appointment. Learn the basics of either the 3D printer\, laser cutter\, or Cricut in a one-hour crash course at the AIC.  \nCertifications can be held for one or two people. Cost is $25 per person and payment will be collected on the day of the class by card or cash. \n  \n3D printing and Cricut certifications can be adapted for children 6-12 years old. Child(ren) must be accompanied by an adult.  \nReserve an appointment for certification here. \n  \n\n3D Printer Certification\n3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \n\nCricut Maker Certification\nAttention crafters: if you’re looking for a new tool that can simplify your crafting processes\, consider learning about the Cricut Maker! \nThe Cricut Maker can cut\, draw\, perforate\, score\, and even engrave! It cuts through more than 100 types of materials\, including all kinds of fabric\, textiles\, paper\, vinyl\, craft foam\, and wood veneer. \nThis machine can cut out dozens of identical felt hearts\, or a delicate lacy paper wedding invitation. Customize everything from a coffee mug to a tee shirt in just a few clicks. \nCricut machines are easy to use and only limited by your imagination! \n\nLaser Cutter Certification\nMeet the AIC’s laser cutter! Laser cutters are incredible tools for any maker. You can make everything from simple boxes to highly detailed engravings and complex 3-dimensional puzzles. \nWho uses laser cutting technology? Artists\, architects\, manufacturers\, robotics engineers\, and small business owners! You can cut extremely accurate objects out of materials like wood\, leather\, colored acrylic\, and even felt or paper. These powerful machines can make your projects lightning fast and repeatable. \nIn this certification class\, you will learn how to safely operate a laser cutter to cut and engrave wood. You will be introduced to Lightburn software and create a customized keychain to bring home with you. \nCertified individuals will be permitted to use the laser cutter during maker hours with supervision. \nPrerequisite: Age 16+
URL:https://westonaic.org/class/tech-certifications-3d-printer-laser-cutter-cricut-maker-3/2026-04-29/
LOCATION:MA
CATEGORIES:3D Printing Certification,Cricut Maker Certification,Laser Cutter Certification
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2025/05/Certification-by-Appointment.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260227T100000
DTEND;TZID=America/New_York:20260227T110000
DTSTAMP:20260505T092608
CREATED:20251106T193302Z
LAST-MODIFIED:20260227T145646Z
UID:39442-1772186400-1772190000@westonaic.org
SUMMARY:Intro to 3D Printing: Flexible Keychain
DESCRIPTION:If you’re curious about 3D printing\, this introductory course will teach you all the basics needed to get started. Each student will select and print a small\, flexible keychain from a catalog of designs. Students may need to return at a later time to pick up their completed print depending on the size and complexity they choose. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \n  \nLimited to 2 people \nCost: $30 \nDate: Friday\, February 27th (10am-11am) \nInstructor: Abby \n  \nIf this time and date doesn’t work for you\, you can sign up for a 3D printer certification by appointment.
URL:https://westonaic.org/class/intro-to-3d-printing-flexible-keychain/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2025/11/Pencil-Cup.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260211T180000
DTEND;TZID=America/New_York:20260211T200000
DTSTAMP:20260505T092608
CREATED:20251106T192034Z
LAST-MODIFIED:20251106T192034Z
UID:39446-1770832800-1770840000@westonaic.org
SUMMARY:Tinkercad for 3D Printing
DESCRIPTION:This is a crash course in 3D modeling with Tinkercad.  \nIf you love 3D printing and want to learn how to build or customize projects\, Tinkercad is a great beginner-friendly program to start with. And it’s free for anyone to use! \nIn this class\, you will learn the basics of the software and how to go about building and manipulating objects. You will become familiar with the terminology and workflow of building a three-dimensional object that can then be 3D printed. Strategies for 3D modeling will be discussed\, as well as strengths and limitations of this software.  \nYou can bring in a laptop\, or one can be provided. Please create a Tinkercad account before the class. \nPrerequisite: Basic computer skills.  \n  \nCost: $45 \nDate: Wednesday February 11th (6pm-8pm) \nInstructor: Abby
URL:https://westonaic.org/class/tinkercad-for-3d-printing/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2025/07/AIC-Website-Fall-2025-Tech-Programs-8.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260128T180000
DTEND;TZID=America/New_York:20260128T190000
DTSTAMP:20260505T092608
CREATED:20251106T163214Z
LAST-MODIFIED:20251106T163214Z
UID:39440-1769623200-1769626800@westonaic.org
SUMMARY:Intro to 3D Printing: Kit Cards
DESCRIPTION:A kit card is a postcard-sized design that you can break apart and assemble into a 3D object. If you’re curious about 3D printing\, this introductory course will teach you all the basics needed to get started. Students may need to return at a later time to pick up their completed print depending on the size and complexity they choose. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \n  \nLimited to 2 people \nCost: $30 \nDate: Wednesday\, January 28th (6pm-7pm) \nInstructor: Abby \n  \nIf this time and date doesn’t work for you\, you can sign up for a 3D printer certification by appointment.
URL:https://westonaic.org/class/intro-to-3d-printing-kit-cards-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2025/07/AIC-Website-Fall-2025-Tech-Programs.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251112T180000
DTEND;TZID=America/New_York:20251112T190000
DTSTAMP:20260505T092608
CREATED:20250912T171721Z
LAST-MODIFIED:20250912T171721Z
UID:38202-1762970400-1762974000@westonaic.org
SUMMARY:Intro to 3D Printing: 3D Printed Pencil Cup
DESCRIPTION:If you’re curious about 3D printing\, this introductory course will give you a crash course. In this certification class\, you will learn all the basics to 3D printing and print a pencil cup. Students will need to return at a later time to pick up their completed print. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \n  \nLimited to 2 people \nCost: $30 \nDate: Wednesday\, November 12th (6pm-7pm) \nInstructor: Abby \n  \nIf this time and date doesn’t work for you\, you can sign up for a 3D Printing certification by appointment.
URL:https://westonaic.org/class/intro-to-3d-printing-3d-printed-pencil-cup-3/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2024/11/AIC-Website-Tech-Programs-Winter-20253.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251015T170000
DTEND;TZID=America/New_York:20251015T200000
DTSTAMP:20260505T092608
CREATED:20250723T150250Z
LAST-MODIFIED:20250927T191258Z
UID:38343-1760547600-1760558400@westonaic.org
SUMMARY:SOLD OUT: Tinkercad for 3D Printing
DESCRIPTION:This is a crash course in 3D modeling with Tinkercad.  \nIf you love 3D printing and want to learn how to build or customize projects\, Tinkercad is a great beginner-friendly program to start with. And it’s free for anyone to use! \nIn this class\, you will learn the basics of the software and how to go about building and manipulating objects. You will become familiar with the terminology and workflow of building a three-dimensional object that can then be 3D printed. You’ll set up a free account with Tinkercad so that you can keep practicing at home. Strategies for 3D modeling will be discussed\, as well as strengths and limitations of this software. With time permitting\, we will start a 3D print of what you modeled.  \nPrerequisite: Basic computer skills (If you’re not sure about your computer skills\, you can sign up for a free session at the Weston Public Library here\, or email ashenker@minlib.net for more information.) \nMaximum # of Students: 4 \nCost: $45 \nDate: Wednesday October 15 (5pm-8pm) \nInstructor: Abby
URL:https://westonaic.org/class/tinkercad-for-3d-printing-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2025/07/AIC-Website-Fall-2025-Tech-Programs-8.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250917T173000
DTEND;TZID=America/New_York:20250917T190000
DTSTAMP:20260505T092608
CREATED:20250718T182654Z
LAST-MODIFIED:20250828T155758Z
UID:38332-1758130200-1758135600@westonaic.org
SUMMARY:SOLD OUT: Intro to 3D Printing: Kit Cards
DESCRIPTION:A kit card is a postcard-sized design that you can break apart and assemble into a 3D object. If you’re curious about 3D printing\, this introductory course will give you a crash course. Students may need to return at a later time to pick up their completed print depending on the size and complexity they choose. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \n  \nLimited to 2 people \nCost: $30 \nDate: Wednesday\, September 174th (5:30pm-7pm) \nInstructor: Abby \n  \nIf this time and date doesn’t work for you\, you can sign up for a 3D printer certification by appointment.
URL:https://westonaic.org/class/intro-to-3d-printing-kit-cards/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2025/07/AIC-Website-Fall-2025-Tech-Programs.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250628T100000
DTEND;TZID=America/New_York:20250628T130000
DTSTAMP:20260505T092608
CREATED:20250517T174520Z
LAST-MODIFIED:20250517T174520Z
UID:38132-1751104800-1751115600@westonaic.org
SUMMARY:Tech Certifications: 3D Printer\, Laser Cutter\, Cricut Maker
DESCRIPTION:Tech certifications are available by appointment. Learn the basics of either the 3D printer\, laser cutter\, or Cricut in a one-hour crash course at the AIC.  \nCertifications can be held for one or two people. Cost is $25 per person and payment will be collected on the day of the class by card or cash. \n  \n3D printing and Cricut certifications can be adapted for children 6-12 years old. Child(ren) must be accompanied by an adult.  \nReserve an appointment for certification here. \n  \n\n3D Printer Certification\n3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \n\nCricut Maker Certification\nAttention crafters: if you’re looking for a new tool that can simplify your crafting processes\, consider learning about the Cricut Maker! \nThe Cricut Maker can cut\, draw\, perforate\, score\, and even engrave! It cuts through more than 100 types of materials\, including all kinds of fabric\, textiles\, paper\, vinyl\, craft foam\, and wood veneer. \nThis machine can cut out dozens of identical felt hearts\, or a delicate lacy paper wedding invitation. Customize everything from a coffee mug to a tee shirt in just a few clicks. \nCricut machines are easy to use\, and only limited by your imagination! \n\nLaser Cutter Certification\nMeet the AIC’s laser cutter! Laser cutters are incredible tools for any maker. You can make everything from simple boxes to highly detailed engravings and complex 3-dimensional puzzles. \nWho uses laser cutting technology? Artists\, architects\, manufacturers\, robotics engineers\, and small business owners! You can cut extremely accurate objects out of materials like wood\, leather\, colored acrylic\, and even felt or paper. These powerful machines can make your projects lightning fast and repeatable. \nIn this certification class\, you will learn how to safely operate a laser cutter to cut and engrave wood. You will be introduced to Lightburn software and create a customized keychain to bring home with you. \nCertified individuals will be permitted to use the laser cutter during maker hours with supervision. \nPrerequisite: Age 16+
URL:https://westonaic.org/class/tech-certifications-3d-printer-laser-cutter-cricut-maker-2/2025-06-28/
LOCATION:MA
CATEGORIES:3D Printing Certification,Cricut Maker Certification,Laser Cutter Certification
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2025/05/Certification-by-Appointment.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250521T180000
DTEND;TZID=America/New_York:20250521T190000
DTSTAMP:20260505T092608
CREATED:20250226T205611Z
LAST-MODIFIED:20250226T205635Z
UID:37370-1747850400-1747854000@westonaic.org
SUMMARY:Intro to 3D Printing: 3D Printed Pencil Cup
DESCRIPTION:If you’re curious about 3D printing\, this introductory course will give you a crash course. In this certification class\, you will learn all the basics to 3D printing and print a pencil cup. Students will need to return at a later time to pick up their completed print. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \n  \nLimited to 2 people \nCost: $30 \nDate: Wednesday\, May 21st (6pm-7pm) \nInstructor: Abby \n  \nIf this time and date doesn’t work for you\, you can sign up for a 3D Printing certification by appointment.
URL:https://westonaic.org/class/intro-to-3d-printing-3d-printed-pencil-cup-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2024/11/AIC-Website-Tech-Programs-Winter-20253.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250423T170000
DTEND;TZID=America/New_York:20250423T190000
DTSTAMP:20260505T092608
CREATED:20241204T170956Z
LAST-MODIFIED:20250127T172636Z
UID:36157-1745427600-1745434800@westonaic.org
SUMMARY:Intro to 3D Printing: 3D Printed Jewelry
DESCRIPTION:This class is part of a 3-part series on fabricating jewelry with the Cricut\, the laser cutter\, or the 3D printer. Sign up for just one or all three parts! \nIf you’re curious about 3D printing\, this introductory course will give you a crash course\, in the context of 3D printed jewelry. Explore the quirky possibilities of fabricating jewelry using this modern method. \nIn this special certification class\, you will learn all the basics to 3D printing. Each student will have the opportunity to select and 3D print one or more small pieces of jewelry using PLA. Depending on their custom project\, students will need to return at a later time to pick up their completed print\, at which point they can collect their jewelry and attach findings! \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \n  \nCost: $30 \nDate: Wednesday April 23 (5pm-7pm) \nInstructor: Abby \n  \nIf this time and date doesn’t work for you\, you can sign up for a Cricut certification by appointment.
URL:https://westonaic.org/class/intro-to-3d-printing-3d-printed-jewelry-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification,Classes,Equipment Training,Jewelry,Tech/Fabrication
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2024/11/AIC-Website-Tech-Programs-Winter-20259.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250314T110000
DTEND;TZID=America/New_York:20250314T120000
DTSTAMP:20260505T092608
CREATED:20241204T170808Z
LAST-MODIFIED:20250220T005001Z
UID:36151-1741950000-1741953600@westonaic.org
SUMMARY:SOLD OUT: Intro to 3D Printing: 3D Printed Pencil Cup
DESCRIPTION:If you’re curious about 3D printing\, this introductory course will give you a crash course. In this certification class\, you will learn all the basics to 3D printing and print a pencil cup. Students will need to return at a later time to pick up their completed print. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \n  \nLimited to 2 people \nCost: $30 \nDate: Friday\, March 14th (11am-12pm) \nInstructor: Abby \n  \nIf this time and date doesn’t work for you\, you can sign up for a Cricut certification by appointment.
URL:https://westonaic.org/class/intro-to-3d-printing-3d-printed-pencil-cup/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2024/11/AIC-Website-Tech-Programs-Winter-20253.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250122T150000
DTEND;TZID=America/New_York:20250122T160000
DTSTAMP:20260505T092608
CREATED:20241227T192925Z
LAST-MODIFIED:20241227T192925Z
UID:36684-1737558000-1737561600@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Everyone will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \nLimited to 2 people per session. \nCost: $25 \nDate: Wednesday\, January 22 (3pm-4pm) \nInstructor: Abby \nPrerequisite: Must be 13 or older. \nCertifications are also available by appointment.
URL:https://westonaic.org/class/3d-printing-certification-60/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2024/12/AIC-Website-Tech-Programs-Winter-2025-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250110T110000
DTEND;TZID=America/New_York:20250110T120000
DTSTAMP:20260505T092608
CREATED:20241227T191252Z
LAST-MODIFIED:20241227T191252Z
UID:36676-1736506800-1736510400@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Everyone will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \nLimited to 2 people per session. \nCost: $25 \nDate: Friday\, January 10 (11am-12pm) \nInstructor: Abby \nPrerequisite: Must be 13 or older. \nCertifications are also available by appointment.
URL:https://westonaic.org/class/3d-printing-certification-59/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2024/12/AIC-Website-Tech-Programs-Winter-2025-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241009T183000
DTEND;TZID=America/New_York:20241009T200000
DTSTAMP:20260505T092608
CREATED:20240809T151043Z
LAST-MODIFIED:20240914T140447Z
UID:34896-1728498600-1728504000@westonaic.org
SUMMARY:SOLD OUT: 3D Print a Tealight Holder
DESCRIPTION:In this special certification class\, you will learn all the basics to 3D printing. After a crash course\, each student will have the opportunity to print a modern tealight holder. Students will need to return at a later date to pick up their completed print\, at which point they can collect their print and an electric tealight! \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \n  \nMaximum Number of Students: 2 \nCost: $25 \nDate: Wed\, October 9 (6:30pm-8pm) \nInstructor: Abby
URL:https://westonaic.org/class/3d-print-a-tealight-holder/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification,Crafts
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2024/07/AIC-Website-Fall-2024-tech-programming-6.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240904T180000
DTEND;TZID=America/New_York:20240904T200000
DTSTAMP:20260505T092608
CREATED:20240809T144929Z
LAST-MODIFIED:20240814T161549Z
UID:35182-1725472800-1725480000@westonaic.org
SUMMARY:Intro to 3D Printing: 3D Printed Jewelry
DESCRIPTION:This class is part of a 3-part series on fabricating jewelry with the Cricut\, the laser cutter\, or the 3D printer. Sign up for just one or all three parts! \nIf you’re curious about 3D printing\, this introductory course will give you a crash course\, in the context of 3D printed jewelry. Explore the quirky possibilities of fabricating jewelry using this modern method. \nIn this special certification class\, you will learn all the basics to 3D printing. Each student will have the opportunity to select and 3D print one or more small pieces of jewelry using PLA. Depending on their custom project\, students will need to return at a later time to pick up their completed print\, at which point they can collect their jewelry and attach findings! \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \n  \nCost: $30 \nDate: Wed\, September 4 (6pm-8pm) \nInstructor: Abby
URL:https://westonaic.org/class/intro-to-3d-printing-3d-printed-jewelry/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification,Classes,Equipment Training,Jewelry,Tech/Fabrication
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2024/08/2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240612T180000
DTEND;TZID=America/New_York:20240612T190000
DTSTAMP:20260505T092608
CREATED:20240601T180806Z
LAST-MODIFIED:20240601T180806Z
UID:34764-1718215200-1718218800@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, June 12 (6pm-7pm) \nInstructor: Abby Shenker \nPrerequisite: Must be 13 or older.
URL:https://westonaic.org/class/2024-06-12-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240607T110000
DTEND;TZID=America/New_York:20240607T120000
DTSTAMP:20260505T092608
CREATED:20240601T181124Z
LAST-MODIFIED:20240601T181124Z
UID:34763-1717758000-1717761600@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Fri\, June 7 (11am-12pm) \nInstructor: Abby Shenker \nPrerequisite: Must be 13 or older.
URL:https://westonaic.org/class/2024-06-07-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240605T180000
DTEND;TZID=America/New_York:20240605T190000
DTSTAMP:20260505T092608
CREATED:20240601T181310Z
LAST-MODIFIED:20240601T181310Z
UID:34762-1717610400-1717614000@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, June 5 (6pm-7pm) \nInstructor: Abby Shenker \nPrerequisite: Must be 13 or older.
URL:https://westonaic.org/class/3d-printing-certification-58/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240522T180000
DTEND;TZID=America/New_York:20240522T190000
DTSTAMP:20260505T092608
CREATED:20240229T005306Z
LAST-MODIFIED:20240229T005306Z
UID:34215-1716400800-1716404400@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, May 22 (6pm-7pm) \nInstructor: Abby Shenker \nPrerequisite: Must be 13 or older.
URL:https://westonaic.org/class/2024-05-22/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240515T180000
DTEND;TZID=America/New_York:20240515T190000
DTSTAMP:20260505T092608
CREATED:20240229T005509Z
LAST-MODIFIED:20240229T005509Z
UID:34214-1715796000-1715799600@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, May 15 (6pm-7pm) \nInstructor: Abby Shenker \nPrerequisites: Must be 13 or older.
URL:https://westonaic.org/class/2024-05-15/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240504T120000
DTEND;TZID=America/New_York:20240504T133000
DTSTAMP:20260505T092608
CREATED:20240214T205444Z
LAST-MODIFIED:20240228T211909Z
UID:34133-1714824000-1714829400@westonaic.org
SUMMARY:3D Print a Set of Plant Pots: 3D Printing Certification
DESCRIPTION:In this special certification class\, you will learn all the basics to 3D printing. After a crash course\, each student will have the opportunity to print a set of 3 mini plant pots. Students will need to return at a later date to pick up their completed print\, at which point they can collect their pots and mini succulents! \n3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D or Ender 3 printers. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \n  \nMaximum Number of Students: 4 \nCost: $50 (Includes 3 printed pots and 3 succulents) \nDate: Sat\, May 4 (12pm-1:30pm) \nInstructor: Abby
URL:https://westonaic.org/class/3d-print-a-plant-pot-3d-printing-certification-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification,Plants
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2024/02/Print-a-Mini-Plant-Pot-3D-Printing-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240503T120000
DTEND;TZID=America/New_York:20240503T130000
DTSTAMP:20260505T092608
CREATED:20240229T010125Z
LAST-MODIFIED:20240229T010125Z
UID:34225-1714737600-1714741200@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Fri\, May 3 (12pm-1pm) \nInstructor: Abby \nPrerequisite: Must be 13 or older.
URL:https://westonaic.org/class/2024-05-03/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240424T180000
DTEND;TZID=America/New_York:20240424T193000
DTSTAMP:20260505T092608
CREATED:20240214T204929Z
LAST-MODIFIED:20240223T201414Z
UID:34130-1713981600-1713987000@westonaic.org
SUMMARY:3D Print a Set of Plant Pots: 3D Printing Certification
DESCRIPTION:In this special certification class\, you will learn all the basics to 3D printing. After a crash course\, each student will have the opportunity to print a set of 3 mini plant pots. Students will need to return at a later date to pick up their completed print\, at which point they can collect their pots and mini succulents! \n3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D or Ender 3 printers. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \n  \nMaximum Number of Students: 4 \nCost: $50 (Includes 3 printed pots and 3 succulents) \nDate: Wed\, April 24 (6pm-7:30pm) \nInstructor: Abby
URL:https://westonaic.org/class/3d-print-a-plant-pot-3d-printing-certification/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification,Plants
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2024/02/Print-a-Mini-Plant-Pot-3D-Printing-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240410T180000
DTEND;TZID=America/New_York:20240410T190000
DTSTAMP:20260505T092608
CREATED:20240229T004904Z
LAST-MODIFIED:20240229T004904Z
UID:34213-1712772000-1712775600@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, April 10 (6pm-7pm) \nInstructor: Abby Shenker \nPrerequisites: Must be 13 or older.
URL:https://westonaic.org/class/3d-printing-certification-56/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240327T180000
DTEND;TZID=America/New_York:20240327T190000
DTSTAMP:20260505T092608
CREATED:20231125T194008Z
LAST-MODIFIED:20231129T145111Z
UID:33223-1711562400-1711566000@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, March 27 (6pm-7pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/2024-03-27-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240322T130000
DTEND;TZID=America/New_York:20240322T140000
DTSTAMP:20260505T092608
CREATED:20231125T184351Z
LAST-MODIFIED:20240308T151741Z
UID:33248-1711112400-1711116000@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Fri\, March 22 (1pm-2pm) \nInstructor: Abby
URL:https://westonaic.org/class/2024-03-22-3/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240320T180000
DTEND;TZID=America/New_York:20240320T190000
DTSTAMP:20260505T092608
CREATED:20231125T194216Z
LAST-MODIFIED:20231129T145016Z
UID:33222-1710957600-1710961200@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, March 20 (6pm-7pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/2024-03-20-3/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240313T180000
DTEND;TZID=America/New_York:20240313T190000
DTSTAMP:20260505T092608
CREATED:20231125T194444Z
LAST-MODIFIED:20231129T144849Z
UID:33221-1710352800-1710356400@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, March 13 (6pm-7pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/2024-03-13-4/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240308T120000
DTEND;TZID=America/New_York:20240308T130000
DTSTAMP:20260505T092608
CREATED:20231125T184813Z
LAST-MODIFIED:20231129T144830Z
UID:33247-1709899200-1709902800@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Fri\, March 8 (12pm-1pm) \nInstructor: Abby
URL:https://westonaic.org/class/2024-03-08-3/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240306T180000
DTEND;TZID=America/New_York:20240306T190000
DTSTAMP:20260505T092608
CREATED:20231125T194703Z
LAST-MODIFIED:20231129T144756Z
UID:33220-1709748000-1709751600@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, March 6 (6pm-7pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/2024-03-06/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D Printing Certification
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/3dprinting-certification.jpg
END:VEVENT
END:VCALENDAR