BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Weston Art & Innovation Center - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Weston Art & Innovation Center
X-ORIGINAL-URL:https://westonaic.org
X-WR-CALDESC:Events for Weston Art & Innovation Center
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260411T100000
DTEND;TZID=America/New_York:20260411T123000
DTSTAMP:20260501T094419
CREATED:20260214T151603Z
LAST-MODIFIED:20260410T152659Z
UID:40870-1775901600-1775910600@westonaic.org
SUMMARY:Youth Introduction to 3D Modeling and Animation
DESCRIPTION:Learn the basics of 3D modeling and animation with Pokemon!  This workshop will cover modeling\, coloring\, grease pencil\, and animation to create a short animated video clip.  No drawing skills required! Open to students 6th-9th grade. Registration closes April 8. \n  \nMinimum # of Students: 4 \nMaximum # of Students: 8 \nCost: $45 \nDate: Saturday April 11 (10am-12:30pm) \n  \nJust a friendly reminder that classes which do not meet the minimum enrollment requirements will be canceled.
URL:https://westonaic.org/class/youth-introduction-to-3d-modeling-and-animation/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Computer graphics,Tech/Fabrication,Teens
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2026/02/Animation.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260211T180000
DTEND;TZID=America/New_York:20260211T200000
DTSTAMP:20260501T094419
CREATED:20251106T192034Z
LAST-MODIFIED:20251106T192034Z
UID:39446-1770832800-1770840000@westonaic.org
SUMMARY:Tinkercad for 3D Printing
DESCRIPTION:This is a crash course in 3D modeling with Tinkercad.  \nIf you love 3D printing and want to learn how to build or customize projects\, Tinkercad is a great beginner-friendly program to start with. And it’s free for anyone to use! \nIn this class\, you will learn the basics of the software and how to go about building and manipulating objects. You will become familiar with the terminology and workflow of building a three-dimensional object that can then be 3D printed. Strategies for 3D modeling will be discussed\, as well as strengths and limitations of this software.  \nYou can bring in a laptop\, or one can be provided. Please create a Tinkercad account before the class. \nPrerequisite: Basic computer skills.  \n  \nCost: $45 \nDate: Wednesday February 11th (6pm-8pm) \nInstructor: Abby
URL:https://westonaic.org/class/tinkercad-for-3d-printing/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2025/07/AIC-Website-Fall-2025-Tech-Programs-8.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251015T170000
DTEND;TZID=America/New_York:20251015T200000
DTSTAMP:20260501T094419
CREATED:20250723T150250Z
LAST-MODIFIED:20250927T191258Z
UID:38343-1760547600-1760558400@westonaic.org
SUMMARY:SOLD OUT: Tinkercad for 3D Printing
DESCRIPTION:This is a crash course in 3D modeling with Tinkercad.  \nIf you love 3D printing and want to learn how to build or customize projects\, Tinkercad is a great beginner-friendly program to start with. And it’s free for anyone to use! \nIn this class\, you will learn the basics of the software and how to go about building and manipulating objects. You will become familiar with the terminology and workflow of building a three-dimensional object that can then be 3D printed. You’ll set up a free account with Tinkercad so that you can keep practicing at home. Strategies for 3D modeling will be discussed\, as well as strengths and limitations of this software. With time permitting\, we will start a 3D print of what you modeled.  \nPrerequisite: Basic computer skills (If you’re not sure about your computer skills\, you can sign up for a free session at the Weston Public Library here\, or email ashenker@minlib.net for more information.) \nMaximum # of Students: 4 \nCost: $45 \nDate: Wednesday October 15 (5pm-8pm) \nInstructor: Abby
URL:https://westonaic.org/class/tinkercad-for-3d-printing-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2025/07/AIC-Website-Fall-2025-Tech-Programs-8.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241009T183000
DTEND;TZID=America/New_York:20241009T200000
DTSTAMP:20260501T094419
CREATED:20240809T151043Z
LAST-MODIFIED:20240914T140447Z
UID:34896-1728498600-1728504000@westonaic.org
SUMMARY:SOLD OUT: 3D Print a Tealight Holder
DESCRIPTION:In this special certification class\, you will learn all the basics to 3D printing. After a crash course\, each student will have the opportunity to print a modern tealight holder. Students will need to return at a later date to pick up their completed print\, at which point they can collect their print and an electric tealight! \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \n  \nMaximum Number of Students: 2 \nCost: $25 \nDate: Wed\, October 9 (6:30pm-8pm) \nInstructor: Abby
URL:https://westonaic.org/class/3d-print-a-tealight-holder/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification,Crafts
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2024/07/AIC-Website-Fall-2024-tech-programming-6.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240724T090000
DTEND;TZID=America/New_York:20240726T130000
DTSTAMP:20260501T094419
CREATED:20230908T190233Z
LAST-MODIFIED:20240711T132611Z
UID:31317-1721811600-1721998800@westonaic.org
SUMMARY:Teen Summer Series: Craft with Cricut
DESCRIPTION:This summer series is all about the fun ways that crafts and creativity intersect with digital technology on a Cricut cutting machine. \nStudents will learn the essentials of vector design as well as explore every aspect of Cricut Design Space. They will have the opportunity to personalize stickers\, decals\, bags\, and cards. They will work on their own Cricut Joy machine\, as well as learning to use the different heat presses that we have at the AIC.  \nTeens will walk away with digital skills that they can use to be endlessly creative or even start a small business. The best part? They get to walk away with a new Cricut Joy! Registration closes July 19. \n  \nAll materials included. \nThis class is open for those entering 6th-12th grade. \n  \nMinimum Number of Students: 2 \nMaximum Number of Students: 4 \nCost: $320 (all materials and Cricut Joy included) \nDate: July 24th-26th\, 9am-1pm \nInstructor: Abby \n  \nJust a friendly reminder that classes which do not meet the minimum enrollment requirements will be canceled.
URL:https://westonaic.org/class/teen-summer-series-craft-with-cricut-2/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Events,Tech/Fabrication,Teen,Teens
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2023/04/Cricut-Summer-Series-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240621T100000
DTEND;TZID=America/New_York:20240622T140000
DTSTAMP:20260501T094419
CREATED:20231101T183524Z
LAST-MODIFIED:20240522T183626Z
UID:31695-1718964000-1719064800@westonaic.org
SUMMARY:Cricut Joy Boot Camp
DESCRIPTION:This Cricut boot camp will rocket you towards pro status on the Cricut Joy!  \nOver two days\, students will explore every important feature of Cricut Design Space so that you can create and customize your own images. You will have the opportunity to make custom decals\, bags\, and/or cards. You’ll spend boot camp getting to know your brand new Cricut Joy as well as the heat presses at the AIC. Registration closes Jun 19. \nStudents will learn digital skills that they can use to be endlessly creative or even start a small business. The best part? You get to walk away with a new Cricut Joy! \n  \nMinimum Number of Students: 2 \nMaximum Number of Students: 6 \n  \nCost: 275$ (all materials plus Cricut Joy included) \nDate: June 21-22 (10am-2pm) \nInstructor: Abby
URL:https://westonaic.org/class/cricut-joy-boot-camp/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Crafts,Events,Tech/Fabrication
ATTACH;FMTTYPE=image/jpeg:https://westonaic.org/wp-content/uploads/2023/11/AIC-Cricut-boot-camp-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240504T120000
DTEND;TZID=America/New_York:20240504T133000
DTSTAMP:20260501T094419
CREATED:20240214T205444Z
LAST-MODIFIED:20240228T211909Z
UID:34133-1714824000-1714829400@westonaic.org
SUMMARY:3D Print a Set of Plant Pots: 3D Printing Certification
DESCRIPTION:In this special certification class\, you will learn all the basics to 3D printing. After a crash course\, each student will have the opportunity to print a set of 3 mini plant pots. Students will need to return at a later date to pick up their completed print\, at which point they can collect their pots and mini succulents! \n3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D or Ender 3 printers. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \n  \nMaximum Number of Students: 4 \nCost: $50 (Includes 3 printed pots and 3 succulents) \nDate: Sat\, May 4 (12pm-1:30pm) \nInstructor: Abby
URL:https://westonaic.org/class/3d-print-a-plant-pot-3d-printing-certification-2/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification,Plants
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2024/02/Print-a-Mini-Plant-Pot-3D-Printing-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240424T180000
DTEND;TZID=America/New_York:20240424T193000
DTSTAMP:20260501T094419
CREATED:20240214T204929Z
LAST-MODIFIED:20240223T201414Z
UID:34130-1713981600-1713987000@westonaic.org
SUMMARY:3D Print a Set of Plant Pots: 3D Printing Certification
DESCRIPTION:In this special certification class\, you will learn all the basics to 3D printing. After a crash course\, each student will have the opportunity to print a set of 3 mini plant pots. Students will need to return at a later date to pick up their completed print\, at which point they can collect their pots and mini succulents! \n3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D or Ender 3 printers. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \n  \nMaximum Number of Students: 4 \nCost: $50 (Includes 3 printed pots and 3 succulents) \nDate: Wed\, April 24 (6pm-7:30pm) \nInstructor: Abby
URL:https://westonaic.org/class/3d-print-a-plant-pot-3d-printing-certification/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,3D Printing Certification,Plants
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2024/02/Print-a-Mini-Plant-Pot-3D-Printing-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240220T090000
DTEND;TZID=America/New_York:20240223T130000
DTSTAMP:20260501T094419
CREATED:20231021T152323Z
LAST-MODIFIED:20240215T150743Z
UID:31667-1708419600-1708693200@westonaic.org
SUMMARY:February Maker Week for Teens
DESCRIPTION:This February workshop is for creative\, crafty\, and curious teens!  \nOver four days\, teens will get a crash course in 3D printing\, Cricut machines\, and laser cutting. They’ll explore the digital design aspect of modern making and learn how to make their imagined ideas into physical objects. They will use these machines to design and fabricate their own creations! \nMaker education and design thinking empower kids to learn creativity\, problem solving\, and collaboration.  \n  \nThis class is open for those in 6th-12th grade. \nMinimum Number of Students: 3 \nMaximum Number of Students: 6 \nCost: $375 (all materials included) \nDate: February 20th-23rd\, 9am-1pm \n  \nInstructor: Abby
URL:https://westonaic.org/class/february-maker-week-for-teens/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Events,Tech/Fabrication,Teen,Teens
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2023/10/AIC-Website-February-Maker-Camp-6.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231117T110000
DTEND;TZID=America/New_York:20231117T120000
DTSTAMP:20260501T094419
CREATED:20230628T204032Z
LAST-MODIFIED:20230916T191843Z
UID:30369-1700218800-1700222400@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Fri\, November 17 (11am-12pm) \nInstructor: Abby
URL:https://westonaic.org/class/2023-11-17/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231109T160000
DTEND;TZID=America/New_York:20231109T180000
DTSTAMP:20260501T094419
CREATED:20230627T160813Z
LAST-MODIFIED:20231003T190311Z
UID:29388-1699545600-1699552800@westonaic.org
SUMMARY:Beginner Robotics Series for Teens
DESCRIPTION:In this 6 week Beginner Robotics Series\, students will learn how to use the Arduino microcontroller to interact with the world through robotics. The series will cover basic motors\, sensors\, and other tools such as 3D printing. With a project oriented approach\, students will be building their own projects with a high level of customizability and independence with instructor guidance. Students will be creating things such as robot grippers\, auto light switches\, and pipe freeze warning systems. Each class will be focused on small projects\, which culminate into a bigger final project on robot cars. Registration closes Nov 4.  \nMinimum # of Students: 4 \nMaximum # of Students: 8 \nCost: $325 (kits included) \nDate: 6 week series starting Thurs\, Nov 9 (Nov 9\, 16\, 30\, Dec 7\, 14 & 21) **(No class on Nov 23)** (4pm-6pm) \nJust a friendly reminder that classes which do not meet the minimum enrollment requirements will be canceled.
URL:https://westonaic.org/class/beginner-robotics-series-for-teens-2/2023-11-09/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Arduino,Classes,Electronics,Robotics,Tech/Fabrication,Teen,Teens
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2023/04/AIC-Newsletter-Beginner-Robotics-Series-2.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231108T170000
DTEND;TZID=America/New_York:20231108T180000
DTSTAMP:20260501T094419
CREATED:20230628T184245Z
LAST-MODIFIED:20230628T204714Z
UID:30401-1699462800-1699466400@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, November 8 (5pm-6pm) \nInstructor: Abby
URL:https://westonaic.org/class/2023-11-08/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231027T110000
DTEND;TZID=America/New_York:20231027T120000
DTSTAMP:20260501T094419
CREATED:20230916T204317Z
LAST-MODIFIED:20230916T204317Z
UID:31482-1698404400-1698408000@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Fri\, October 27 (11am-12pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/2023-10-27/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231025T180000
DTEND;TZID=America/New_York:20231025T190000
DTSTAMP:20260501T094419
CREATED:20230628T185556Z
LAST-MODIFIED:20230628T204850Z
UID:30399-1698256800-1698260400@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, October 25 (6pm-7pm) \nInstructor: Abby
URL:https://westonaic.org/class/2023-10-25-3/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231020T110000
DTEND;TZID=America/New_York:20231020T120000
DTSTAMP:20260501T094419
CREATED:20230916T204526Z
LAST-MODIFIED:20230916T204526Z
UID:31481-1697799600-1697803200@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Fri\, October 20 (11am-12pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/2023-10-20/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231013T110000
DTEND;TZID=America/New_York:20231013T120000
DTSTAMP:20260501T094419
CREATED:20230916T204646Z
LAST-MODIFIED:20230916T204646Z
UID:31479-1697194800-1697198400@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Fri\, October 13 (11am-12pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/3d-printing-certification-53/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231011T180000
DTEND;TZID=America/New_York:20231011T190000
DTSTAMP:20260501T094419
CREATED:20230628T190232Z
LAST-MODIFIED:20230628T204902Z
UID:30398-1697047200-1697050800@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, October 11 (6pm-7pm) \nInstructor: Abby
URL:https://westonaic.org/class/2023-10-11-3/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20231004T140000
DTEND;TZID=America/New_York:20231004T150000
DTSTAMP:20260501T094419
CREATED:20230628T204538Z
LAST-MODIFIED:20230726T204517Z
UID:30368-1696428000-1696431600@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, October 4 (2pm-3pm) \nInstructor: Abby
URL:https://westonaic.org/class/2023-10-06/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230927T180000
DTEND;TZID=America/New_York:20230927T190000
DTSTAMP:20260501T094419
CREATED:20230628T190409Z
LAST-MODIFIED:20230628T204835Z
UID:30396-1695837600-1695841200@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, September 27 (6pm-7pm) \nInstructor: Abby
URL:https://westonaic.org/class/3d-printing-certification-23/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230913T140000
DTEND;TZID=America/New_York:20230913T150000
DTSTAMP:20260501T094419
CREATED:20230628T203519Z
LAST-MODIFIED:20230726T205430Z
UID:30366-1694613600-1694617200@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, Sept 13 (2pm-3pm) \nInstructor: Abby
URL:https://westonaic.org/class/3d-printing-certification-52/
LOCATION:The Toolshed\, 356 Boston Post Road\, 1st floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230830T180000
DTEND;TZID=America/New_York:20230830T190000
DTSTAMP:20260501T094419
CREATED:20230621T172019Z
LAST-MODIFIED:20230621T172019Z
UID:30165-1693418400-1693422000@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, August 30 (6pm-7pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/2023-08-30/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230823T180000
DTEND;TZID=America/New_York:20230823T190000
DTSTAMP:20260501T094419
CREATED:20230621T171834Z
LAST-MODIFIED:20230621T171834Z
UID:30164-1692813600-1692817200@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, August 23 (6pm-7pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/2023-08-23/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230726T180000
DTEND;TZID=America/New_York:20230726T190000
DTSTAMP:20260501T094419
CREATED:20230621T164230Z
LAST-MODIFIED:20230621T164230Z
UID:30145-1690394400-1690398000@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, July 26 (6pm-7pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/3d-printing-certification-50/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230718T090000
DTEND;TZID=America/New_York:20230721T130000
DTSTAMP:20260501T094419
CREATED:20230421T185434Z
LAST-MODIFIED:20230711T143139Z
UID:29556-1689670800-1689944400@westonaic.org
SUMMARY:Teen Summer Series: Craft with Cricut
DESCRIPTION:This summer series is all about the fun ways that crafts and creativity intersect with digital technology on a Cricut cutting machine. \nStudents will learn the essentials of vector design as well as explore every aspect of Cricut Design Space. They will have the opportunity to personalize stickers\, decals\, bags\, and cards. They will work on their own Cricut Joy machine\, as well as learning to use the Cricut Makers and heat presses that we have at the AIC.  \nTeens will walk away with digital skills that they can use to be endlessly creative or even start a small business. The best part? They get to walk away with a new Cricut Joy! Registration closes July 16. \n  \nAll materials included. \nThis class is open for those entering 6th-12th grade. \n  \nMinimum Number of Students: 4 \nMaximum Number of Students: 8 \nCost: $350 (all materials and Cricut Joy included) \nDate: July 18th-21st\, 9am-1pm \nInstructor: Abby
URL:https://westonaic.org/class/teen-summer-series-craft-with-cricut/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Events,Tech/Fabrication,Teen,Teens
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2023/04/Cricut-Summer-Series-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230711T090000
DTEND;TZID=America/New_York:20230714T130000
DTSTAMP:20260501T094419
CREATED:20230331T193829Z
LAST-MODIFIED:20230606T164741Z
UID:29132-1689066000-1689339600@westonaic.org
SUMMARY:Teen Summer Series: How to Build and Use a 3D Printer
DESCRIPTION:Join our 4 day teen summer series and build your own 3D printer!  \nStudents will learn the principles of digital fabrication\, 3D scanning\, and be introduced to 3D modeling. They will understand how this technology works\, what its limitations are\, and how to troubleshoot printing failures. \nEach student will assemble and calibrate a 3D printer\, which they will take home at the end of the course. Each student will learn to operate the 3D printers and the Einscan-SE 3D scanner. Students will become familiar with multiple free 3D modeling programs. All materials included! Registration closes July 7. \nThis class is open for those entering 6th-12th grade. \nMinimum Number of Students: 4 \nMaximum Number of Students: 8 \nCost: $350 (all materials included) \nDate: July 11th-14th\, 9am-1pm \nInstructor: Abby \n*Based on a class at Brandeis IBS developed by Ian Roy*
URL:https://westonaic.org/class/intro-to-3d-printing-series-how-to-build-and-use-a-3d-printer-4/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Events,Tech/Fabrication,Teen,Teens
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2023/03/Build.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230705T180000
DTEND;TZID=America/New_York:20230705T190000
DTSTAMP:20260501T094419
CREATED:20230621T163856Z
LAST-MODIFIED:20230621T163856Z
UID:30129-1688580000-1688583600@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, July 5 (6pm-7pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/3d-printing-certification-49/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230616T140000
DTEND;TZID=America/New_York:20230616T150000
DTSTAMP:20260501T094419
CREATED:20230415T164048Z
LAST-MODIFIED:20230513T134218Z
UID:29372-1686924000-1686927600@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \nLimited to 2 people per session \nCost: $25 \nDate: Fri\, June 16 (2pm-3pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/3d-printing-certification-48/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230609T140000
DTEND;TZID=America/New_York:20230609T150000
DTSTAMP:20260501T094419
CREATED:20230415T163813Z
LAST-MODIFIED:20230513T133931Z
UID:29363-1686319200-1686322800@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \nLimited to 2 people per session \nCost: $25 \nDate: Friday\, June 9 (2pm-3pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/3d-printing-certification-47/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230602T140000
DTEND;TZID=America/New_York:20230602T150000
DTSTAMP:20260501T094419
CREATED:20230415T162209Z
LAST-MODIFIED:20230513T133232Z
UID:29352-1685714400-1685718000@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours. \nLimited to 2 people per session \nCost: $25 \nDate: Friday\, June 2 (2pm-3pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/3d-printing-certification-46/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230531T180000
DTEND;TZID=America/New_York:20230531T190000
DTSTAMP:20260501T094419
CREATED:20230315T174705Z
LAST-MODIFIED:20230315T174705Z
UID:28580-1685556000-1685559600@westonaic.org
SUMMARY:3D Printing Certification
DESCRIPTION:3D printers can create prototypes\, replacement parts\, toys\, jewelry\, and much more in a matter of minutes with minimal training to get started. Want to learn how? Sign up to this class to learn the basics of 3D printing. \nAfter going over the fundamental concepts of 3D printing\, each student will learn how to find and prepare digital files for our Prusa 3D printers. Each student will complete a print. Beginners welcome! No 3D modeling experience required. \nUpon completion of this class\, students will be permitted to use the AIC Prusa printers during open maker hours on Wednesdays and Saturdays. \nLimited to 2 people per session \nCost: $25 \nDate: Wed\, May 31 (6pm-7pm) \nInstructor: Abby Shenker
URL:https://westonaic.org/class/3d-printing-certification-45/
LOCATION:The Loft\, 356 Boston Post Road\, 2nd floor\, Weston\, MA\, 02493\, United States
CATEGORIES:3D design,Classes,Equipment Training,Tech/Fabrication
ATTACH;FMTTYPE=image/png:https://westonaic.org/wp-content/uploads/2022/11/AIC-Website-3D-Printer-Certification.png
END:VEVENT
END:VCALENDAR